When SafeHome goes out to carry out a Commercial Inspection in Maryland, Virginia and Washington D.C. area SafeHome the whole building on its interior and exterior, from the roof to the foundation will be inspected.
The SafeHome inspector will do a visual review of all areas of the building and its systems. This would normally include the interior and exterior walls, structural frame, roof, the exterior parking and pedestrian surfaces, interior floors, all plumbing, electrical and heating/cooling equipment. He will inspect the mechanical systems by opening the normal access plates and service compartment covers to allow an interior assessment of the particular piece of equipment.
Heating equipment is normally more fully inspected. The electrical distribution system is normally inspected by means of doing representative sampling of the plugs, lights, and other normal outlets through out the building. In many cases when the building is occupied some of the systems can not be turned on and off.
The Plumbing systems are inspected for general function and leaks. The supply and waste lines are inspected visually where accessible. Water heaters inspected for present leaks and probable life expectancy. Where there are fire suppressions systems they are normally visually reviewed and the main water supply for them is visibly inspected looking for the most recent municipal inspection tags.
The overall structure is inspected including but not limited to the roof, exterior walls, floors, ceiling plenum (void above the drop ceilings where so equipped) and or the attic are inspected.
Click here
Call
1.800.690.4305
English
Espanol
